Keypad Button Feature

(Controls, Keypad)

When a radio comes factory-equipped with an O7 Control Head that has the optional Siren and Lights Keypad, the default Keypad button assignments are pre-configured to correspond with the Keypad's graphics. See the O7 Siren / Lights Keypad Keystone Concept.

For a Dual Radio configuration:

• Button functions for Radio Wide features (Siren-related buttons, Aux Control (1-3), Dim, GunLock (1, 2, 3, or All), Relay Pattern, Radio Swap, and Third Party) must be configured the same for the Primary and Secondary radios; additionally, it is strongly recommended to configure all of the button functions the same for both radios, in order to avoid radio-user confusion.

• When the Radio Selection field is set to "Secondary Radio" and the Siren Operation field is set to "Disabled", all Siren-related Keypad selections are considered valid. (Although the Siren box only connects to the Primary Radio, Siren / PA operation is independent of the current radio selection, and therefore the Siren / PA still operates when the Secondary Radio is selected.)

Button Selections:

This selection is only valid in the CPS, and/or available to the RADIO-USER (for Dual Radio configurations, see the Warning):

Radio Type:

Airhorn

When the Radio Ergonomics Wide, Siren Operation field is set to "Siren / PA", and

when the Radio Ergonomics Wide, HiLo Airhorn Tones field is enabled.

Blank

(Intended for functions that are not in use.)

Direct Ext Radio

When the Radio Ergonomics Wide, Siren Operation field is not set to "Disabled".

Direct Hi / Lo

When the Radio Ergonomics Wide, Siren Operation field is set to "Siren / PA", and

when the Radio Ergonomics Wide, HiLo Airhorn Tones field is "Enabled".

Direct Manual

When the Radio Ergonomics Wide, Siren Operation field is set to "Siren / PA".

Direct Wail

When the Radio Ergonomics Wide, Siren Operation field is set to "Siren / PA".

Direct Yelp

When the Radio Ergonomics Wide, Siren Operation field is set to "Siren / PA".

GunLock
(1, 2, 3, or All)

( When at least one of the radio's VIP Out pins has been programmed for the corresponding "GunLock" function ),

Or

( When the Radio Selection field is set to "Secondary Radio (see the Warning) ).

  See also: Password Required For GunLock.

  You cannot duplicate the same Relay Pattern on more than one Directional Button, Top Function Programmable Button, or Bottom Function Programmable Button "Index" selection; however, Relay Patterns assigned to one of these programmable buttons can be duplicated on a Keypad Button.

Keypad Digit

When selected, always available to the radio-user, and  therefore not dependent on any CPS feature or selection.

MS01– MS13
(Mode Select)

When selected, always available to the radio-user, and  therefore not dependent on any CPS feature or selection.

Public Address (PA)

When the Radio Ergonomics Wide, Siren Operation field is not set to "Disabled".

Relay Pattern

( When the Universal Relay Controller Equipped field is "Enabled" and a URC is connected to the radio ),

Or

( When the Radio Selection field is set to "Secondary Radio, and

When the Universal Relay Controller Equipped field is "Disabled" and a URC is connected to the Primary Radio of a Dual Radio configuration).

  You cannot duplicate the same Relay Pattern on more than one Directional Button, Top Function Programmable Button, or Bottom Function Programmable Button "Index" selection; however, Relay Patterns assigned to one of these programmable buttons can be duplicated on a Keypad Button.

 Once selected, the appropriate Keypad Button Index for the same record / row must also be defined.

  See also: Password Required For Lightbar.

Third Party

When selected, always available to the radio-user, and  therefore not dependent on any CPS feature or selection.

Go to the Keypad Button Page